(r7) Barrick Lab :: ProtocolsBTKAssembleMultipleTUPlasmid

[[GoldenGateAssemblyProtocolsMainPage][Back to Golden Gate Protocols]]

---+ Second Stage Assembly

Second Stage assemblies are used to build plasmids out of multiple transcriptional units ([[http://barricklab.org/twiki/bin/view/Lab/ProtocolsBTKAssembleSingleTUPlasmid Protocol found here]]). Occasionally this assembly can be used as a second step to building troublesome first stage plasmids - the first stage plasmid is assembled in a high copy/easier to work with backbone then moved to lower copy/more difficult to work with backbone. This assembly makes use of the BsmBI enzyme as described below.

---+++ Assembly reaction
[[Old_Golden_Gate_Assembly][Access the old non-kit golden gate assembly protocols here]]

Total volume will be 20 &mu;L; you will need 10 fmol of each transcriptional unit plasmid for this assembly. Various backbones are regularly used in this step - if toxicity issues may be a factor, lower copy number vectors are recommended.

   * 10 fmol of each transcriptional unit/backbone
   * 2 &mu;L of 10× T4 DNA ligase buffer (Promega)
   * 1 &mu;L of BsmBI
   * 1 &mu;L of T4 DNA ligase
   * x &mu;L water up to 20 &mu;L total.
-----------------------------------
Mix samples well by pipetting, then run the reaction on the thermocycler under the following conditions: 

|  *Step*  |  *Temperature*  |  *Time*  |
|  1  |  42°C  |  1.5 min  | 
|  2  |  16°C  |  3 min  | 
| Cycles 1-2: | Repeat 25x |  |
|  3  |  50°C  |  5 min  |
|  4  |  80°C  |  10 min | 
   

   * Transform 2 &mu;L assembly reaction and plate recovery on LB + Selective Antibiotic

[[GoldenGateAssemblyProtocolsMainPage][Back to Golden Gate Protocols]]


----------------------------------------------------------
-- Main.KateElston - 29 Jan 2018

Barrick Lab > BroadHostRangeToolkit > ProtocolsBTKAssembleMultipleTUPlasmid

Contributors to this topic

KateElston, SeanLeonard, VictorLi, PatrickLariviere

Topic revision: r7 - 2021-11-03 - 19:56:23 - Main.VictorLi